Saturday, May 22, 2010

myTake on the ASRock N68-S motherboard - Box contents and review

Today I'll be reviewing the ASRock N68-S Motherboard. It is an AMD motherboard that supports AM2, AM2+, and AM3 CPU sockets, 1066 DDR2 RAM, and has one PCI-e socket and two PCI sockets. There are 4x USB ports on the back of the motherboard. The onboard graphics is the NVIDIA GeForce 7025 chipset. There are 3 audio ports on the back. Inside the box you have a 4 pin to Serial ATA adapter, driver disks, one IDE cable, a back plate, and some manuals. The driver disks include drivers and some utilities for your computer. I couldn't get the utilities to work on Windows 7 Ultimate, but you can always download them from ASRock's website. There were a few minor flaws with this motherboard though.

There are only two DDR2 RAM slots, which are dual channel. There are only two PCI sockets, not a problem for me but might be for others. I ran out of slots for all of my case fans, I couldn't plug in my two case fans without unplugging my CPU fan. My solution was too only power my fan from the 4-pin connector, not the actual slot. Even though my CPU fan now reads at 2,000-2,500RPM.

I was able to overclock my CPU from 3.0GHz to 3.75GHz and my old CPU by the exact same amount, 0.75GHz. This motherboard is also very cheap, one of the cheapest AMD motherboards. This is good for people on a low budget and people who use only dual-channel RAM. It can be found on most online computer stores.

No comments:

Post a Comment